HEP Products: Honda Options

[JayDawg]

TRX 250R

Plastic number plate:
9" X 7" Rear # Plate:
Made from crack resistant UHMW Plastic. Order yours today for only $12.99. Available in black or white only.





Foot Peg Extensions:
Manufactured from 12 ga. steel. Laser cut for perfect fit and finish. Very aggressive teeth pattern. Teeth will not wear down like aluminum either. Black powder coated finish standard. Stainless Steel mounting hardware included. These will bolt up to most models. Designed with large slots for a wide variety of fitment along with being adjustable to move in or out for a wider foot print. May not work with all nerf bars. Please check before ordering. Some models may require drilling holes in oem pegs to install. You will be amazed by the quality of these. We guarantee it. Order yours today for only $34.99





Rear Master Cylinder Guard:
Manufactured from .125" 5052-H-32 Aluminum. Great protection for your rear master cylinder. This guard comes complete with stainless steel mounting hardware. Also, no clumsy spacers needed. Built in .25" Aluminum spacer welded to the back of the guard. Available in a multiple of colors or plain mill finish. (Shown in Black Mini Text powder with red laser cut H.E.P. logo. Order yours today for only $32.99 plus shipping and handling.
Available Finishes:
Mill w/ no logo
Mill w/ black logo
Black w/red logo
Black w/ black logo
Red w/ black logo

[JayDawg]

TRX 250EX

TRX 250 EX Warning Labels:
Our warning label covers are manufactured from 0.040" aluminum and come with holes pre punched ready to install. The labels install with either small stainless hardware or aluminum rivets. Hardware is included. All of our material come with a protective vinyl coating that is removed just before installation. Very inexpensive way to get that custom look. Also available in 0.62" polished aluminum diamond plate. Order yours today for only 24.99 plus shipping and handling.
Available Finishes:
Polished
Black
White
Diamond Plate







Foot Peg Extensions:
Our Bolt on foot peg extensions let you have the benefits of high dollar after market foot pegs at about 1/10 of the price. Manufactured from 12 ga. steel. Laser cut for perfect fit and finish. Very aggressive teeth pattern. Teeth will not wear down like aluminum either. Powder coated finish standard. Stainless Steel mounting hardware included. These will bolt up to most models. Designed with large slots for a wide variety of fitment along with being adjustable to move in or out for a wider foot print. May not work with all nerfs. Please check before ordering. Some models may require drilling holes in oem pegs to install. You will be amazed by the quality of these. We guarantee it. Order yours today for only $34.99





Heat Shield - For Aftermarket Headers:
Our aluminum heat shield is designed to fit a multiple of after market headers. Made from 5052 aluminum. Mounts with 2 stainless steel clamps. (Included) Very easy and very effective. This will save the burns from the open header. Heat shield will come in a mill finish with you picking the color of the logo as show but can be ordered in a variety of colors. If your wanting a special color please call. Order yours today for only $42.99 plus S&H.
Available Finishes:
Stamped
Black
Red
Blue
Yellow
Green
Orange
No logo

[JayDawg]

TRX 300EX

Foot Peg Extensions:
Our Bolt on foot peg extensions let you have the benefits of high dollar after market foot pegs at about 1/10 of the price. Manufactured from 12 ga. steel. Laser cut for perfect fit and finish. Very aggressive teeth pattern. Teeth will not wear down like aluminum either. Powder coated finish standard. Mounting hardware included. Designed with large slots for a wide variety of fitment along with being adjustable to move in or out for a wider foot print. May not work with all nerfs. Please check before ordering. Some models may require drilling holes in oem pegs to install. You will be amazed by the quality of these. We guarantee it. Order yours today for only $34.99 plus S&H.





Aluminum Warning Label Covers:

Our warning label covers are manufactured from 0.040" aluminum and come with holes pre-punched ready to install. Hardware is included. We will either supply small phillips head screws or rivets. You decide. Shown in "mirror polished". All of our material come with a protective vinyl coating that is removed just before installation. Very inexpensive way to get that custom look. Order yours today for only $24.99 plush S&H. Please note, if you are wanting are diamond plate labels in a color please call us. This option can be done at no cost to you.
Available Finishes:
Polished
Black
White
Diamond Plate







Aluminum Rear Caliper Guard:
Our Rear Caliper is a unique and inexpensive way to protect your rear braking system from rocks or other damaging debree. Great protecting for brake pads in extreme dusty conditions. This guard is manufactured from .125" aluminum and is a very sturdy piece. Mounts directly to rear caliper with oem hardware in minutes. Rear caliper must have a bolt spacing of 1.125" between bolts to fit. Order yours today for only $32.99 plus S&H
Available Finishes:
Plain
Black
Red
Yellow
Orange
Blue
Green





Aluminum Rear Master Cylinder Guard:
Made from .125" aluminum. Great protection at a great price. Order yours today for only $14.99 plus S&H.
Available Finishes:
Plain
Black
Red
Yellow
Orange
Blue
Green





Aluminum Battery Guard:
Both brackets are made from 1/8" aluminum. Available in a multiple of colors. Upgrade your OEM plastic battery support with this durable aluminum design. Order yours today for only $34.99 plus S&H.





Aluminum Tool Canister:
A replacement to the cheap oem plastic canister. Made from thick aluminum tubing. Lid is made from rubber and has a water tight seal. Very good looking piece! Available in a wide variety of colors. Order yours today for only $49.99 plus S&H.







Heat Shield - For Aftermarket Headers:
Our aluminum heat shield is designed to fit a multiple of after market headers. Made from 5052 aluminum. Mounts with 2 stainless steel clamps. (Included) Very easy and very effective. This will save the burns from the open header. Heat shield will come in a mill finish with you picking the color of the logo as show but can be ordered in a variety of colors. If your wanting a special color please call. Order yours today for only $42.99 plus S&H.
Available Finishes:
Stamped
Red
Black
Blue
Yellow
Green
Orange
No logo

[JayDawg]

TRX 400EX

Foot Peg Extensions:
Our Bolt on foot peg extensions let you have the benefits of high dollar after market foot pegs at about 1/10 of the price. Manufactured from 12 ga. steel. Laser cut for perfect fit and finish. Very aggressive teeth pattern. Teeth will not wear down like aluminum either. Powder coated finish standard. Mounting hardware included. Designed with large slots for a wide variety of fitment along with being adjustable to move in or out for a wider foot print. May not work with all nerfs. Please check before ordering. Some models may require drilling holes in oem pegs to install. You will be amazed by the quality of these. We guarantee it. Order yours today for only $34.99 plus S&H.





Aluminum Warning Label Covers:

Our warning label covers are manufactured from 0.040" aluminum and come with holes pre-punched ready to install. Hardware is included. We will either supply small phillips head screws or rivets. You decide. Shown in "mirror polished". All of our material come with a protective vinyl coating that is removed just before installation. Very inexpensive way to get that custom look. Order yours today for only $24.99 plush S&H. Please note, if you are wanting are diamond plate labels in a color please call us. This option can be done at no cost to you.
Available Finishes:
Polished
Black
White
Diamond Plate







Aluminum Rear Caliper Guard:
Our Rear Caliper is a unique and inexpensive way to protect your rear braking system from rocks or other damaging debree. Great protecting for brake pads in extreme dusty conditions. This guard is manufactured from .125" aluminum and is a very sturdy piece. Mounts directly to rear caliper with oem hardware in minutes. Rear caliper must have a bolt spacing of 1.125" between bolts to fit. Order yours today for only $32.99 plus S&H
Available Finishes:
Plain
Black
Red
Yellow
Orange
Blue
Green





Aluminum Rear Master Cylinder Guard:
Made from .125" aluminum. Great protection at a great price. Order yours today for only $14.99 plus S&H.
Available Finishes:
Plain
Black
Red
Yellow
Orange
Blue
Green





Aluminum Battery Guard:
Both brackets are made from 1/8" aluminum. Available in a multiple of colors. Upgrade your OEM plastic battery support with this durable aluminum design. Order yours today for only $34.99 plus S&H.





Aluminum Tool Canister:
A replacement to the cheap oem plastic canister. Made from thick aluminum tubing. Lid is made from rubber and has a water tight seal. Very good looking piece! Available in a wide variety of colors. Order yours today for only $49.99 plus S&H.







Heat Shield - For Aftermarket Headers:
Our aluminum heat shield is designed to fit a multiple of after market headers. Made from 5052 aluminum. Mounts with 2 stainless steel clamps. (Included) Very easy and very effective. This will save the burns from the open header. Heat shield will come in a mill finish with you picking the color of the logo as show but can be ordered in a variety of colors. If your wanting a special color please call. Order yours today for only $42.99 plus S&H.
Available Finishes:
Stamped
Red
Black
Blue
Yellow
Green
Orange
No logo

[JayDawg]

TRX 450R

Foot Peg Extensions:
Our Bolt on foot peg extensions let you have the benefits of high dollar after market foot pegs at about 1/10 of the price. Manufactured from 12 ga. steel. Laser cut for perfect fit and finish. Very aggressive teeth pattern. Teeth will not wear down like aluminum either. Powder coated finish standard. Mounting hardware included. Designed with large slots for a wide variety of fitment along with being adjustable to move in or out for a wider foot print. May not work with all nerfs. Please check before ordering. Some models may require drilling holes in oem pegs to install. You will be amazed by the quality of these. We guarantee it. Order yours today for only $34.99 plus S&H.





Aluminum Warning Label Covers:

Our warning label covers are manufactured from 0.040" aluminum and come with holes pre-punched ready to install. Hardware is included. We will either supply small phillips head screws or rivets. You decide. Shown in "mirror polished". All of our material come with a protective vinyl coating that is removed just before installation. Very inexpensive way to get that custom look. Order yours today for only $24.99 plush S&H. Please note, if you are wanting are diamond plate labels in a color please call us. This option can be done at no cost to you.
Available Finishes:
Polished
Black
White
Diamond Plate







Aluminum Battery Guard:
Both brackets are made from 1/8" aluminum. Available in a multiple of colors. Upgrade your OEM plastic battery support with this durable aluminum design. Order yours today for only $34.99 plus S&H.





Aluminum Tool Canister:
A replacement to the cheap oem plastic canister. Made from thick aluminum tubing. Lid is made from rubber and has a water tight seal. Very good looking piece! Available in a wide variety of colors. Order yours today for only $49.99 plus S&H.







Heat Shield - For Aftermarket Headers:
Our aluminum heat shield is designed to fit a multiple of after market headers. Made from 5052 aluminum. Mounts with 2 stainless steel clamps. (Included) Very easy and very effective. This will save the burns from the open header. Heat shield will come in a mill finish with you picking the color of the logo as show but can be ordered in a variety of colors. If your wanting a special color please call. Order yours today for only $42.99 plus S&H.
Available Finishes:
Stamped
Red
Black
Blue
Yellow
Green
Orange
No logo





TRX450 Rear Master Cylinder Guard:
Made from .125" 5052-H32 aluminum. Protects the rear master cylinder. New stainless steel mounting hardware also included. Shown in unfinished bare aluminum. You can also order these powder coated in a multiple of colors. Make sure and choose finish or color below if you using our shopping cart. Great protection at a great price. Order yours today for only 32.99 plus shipping and handling.






TRX450 Race Series Fender Brackets:
Our TRX race series fender are designed to be virtually bullet proof. That is why we will stand behind these 100%. Manufactured from thick 3/16" aluminum and then gusseted for even greater strength. We guarantee you will not brake these. Comes complete with all new stainless steel mounting hardware as shown. These will come in a plain mill finish as shown above. Other colors are available powder coated at no extra charge. If nothing is stated with order you will receive them unfinished. Order yours today for only $62.99.







9" X 7" Rear # Plate:
Made from crack resistant UHMW Plastic. Order yours today for only $12.99. Available in black or white only.





Rear Number Plate & Bracket:
Our number plate & bracket combo is designed to be used with the oem rear grab bar after the taillight is removed. Made from 5052 aluminum and high density crack resistant plastic. Race tested and very durable. Shown with our unfinished mill bracket and white plate. You can order your bracket in a wide variety of colors and our plates in either white or black. Order yours today for only $39.99 plus S&H.
Available Finishes:
Plain w/ white
Plain w/ black
Black w/ black
Black w/ white
Red w/ black
Red w/ white
White w/ white
White w/black

[JayDawg]

TRX 700XX

TRX700XX Warning Labels:
Our warning label covers are manufactured from 0.040" aluminum and come with holes pre-punched ready to install. Hardware is included. We will either supply small phillips head screws or rivets. You decide. Shown in "mirror polished". All of our material come with a protective vinyl coating that is removed just before installation. Very inexpensive way to get that custom look. Order yours today for only $24.99 plush S&H. Please note, if you are wanting are diamond plate labels in a color please call us. This option can be done at no cost to you.
Available Finishes:
Polished
Black
White
Diamond Plate







After Market Exhaust Header Heat Shield:
Our aluminum heat shield is designed to fit a multiple of after market headers. Made from 5052 aluminum. Mounts with 2 stainless steel clamps. (Included) Very easy and very effective. This will save the burns from the open header. Heat shield will come in a mill finish with you picking the color of the logo as show but can be ordered in a variety of colors. If your wanting a special color please call. Order yours today for only $42.99 plus S&H.
Available Finishes:
Stamped
Black
Red
Blue
Yellow
Green
Orange
No logo





Laser Cut Foot Peg Extensions:
Shown to the left is our Laser Cut Foot Peg Extensions. Designed to be used with plastic heel guards. Sold in a pair. Powder coated black finish. Order yours today for only $34.99 plus shipping and handling